Description

INSTALLATION INSTRUCTIONS

CFS-Freezer Epoxy Mortar Kit is a three component 100% solids epoxy mortar designed for freezer / sub zero applications where excellent wear characteristics and strength are required. Mix part A & B of epoxy, then mix with supplied sand to create a high strength mortar mix. Recommended for repairs in heavy traffic areas, forklift traffic and steel wheel equipment production areas. Designed for horizontal use only. Not recommended for immersion applications for acids and chemicals.

This is an EXTREMELY fast setting product.  Have all tools ready and organized for a quick install.  Epoxy should be at room temp +/- 70 degrees before use.

Self priming, NO primer required

Available in natural sand color only.

+/- 2-3 minutes of working time per kit. 

Approximate Coverage:

 .125 cubic feet (approx.) 18 pounds = (+/- 12″ x 12″ x 1.5″ ) repair area

TECHNICAL DATA SHEET:

CFS-FREEZER EPOXY MORTAR KIT

SAFETY DATA SHEET:

CFS-EPOXY COVE MORTAR KIT

FREE SHIPPING