Description

CFS-2C POLYASPARTIC IS A TWO COMPONENT, SLOW SET, VERY LOW ODOR, NEAR ZERO VOC, HIGH GLOSS, 100% UV STABLE TOP COAT.

INTERIOR / EXTERIOR / HIGH GLOSS

PRODUCT DESCRIPTION: CFS-2C Polyaspartic is a two component, very low odor, near zero VOC (28g/l) , 100% UV

stable top coat. It exhibits excellent UV and chemical resistance. Easy to mix 1:1 ratio and long working time.

RECOMMENDED FOR: Primary applications include garages, warehouses, aircraft hangar floors, institutional

facilities, manufacturing plants, factories, schools, containment areas, interior/exterior spaces.

ADVANTAGES: VOC compliant in all 50 states, superior chemical resistance, excellent UV and abrasion

resistance, easy to mix 1:1 ratio by volume, long working time of 35-45 minutes, very little odor, can be used

indoors, excellent bond strength to substrate or other solid coatings.

Coverage over full flake is approximately 125 to 160 square feet per gallon.

Coverage as a neat coat is approximately 200 to 300 square feet per gallon.

** IT IS GOOD PRACTICE TO HAVE EITHER DENATURED ALCOHOL OR XYLENE AVAILABLE WHILE INSTALLING THE TOPCOAT. IF BUBBLES OCCUR FROM VAPOR TRANSMISSION, LIGHTLY MIST EITHER OF THESE SOLVENTS ON TOP WITH A HAND SPRAYER AND THEY WILL POP.

72 hour return to service @ 70° F Cure time will increase in colder environments.

The most user friendly Polyaspartic available today.

PACKAGE IN TWO WAYS:

CONTRACTOR KIT: 2 Gallon Kit, A/B packed in a 3 1/2 Gallon Bucket which also includes a mixing paddle.

OR

BOXED KIT: 2 Gallon Kit,A/B packaged in separate buckets in a box.  Does NOT include mixing paddle or mixing bucket.

INSTALLATION INSTRUCTIONS

TECHNICAL DATA SHEET:

CFS-2C TWO COMPONENT POLYASPARTIC 

SAFETY DATA SHEET:

CFS-2C POLYASPARTIC

FREE SHIPPING