Description

RECOMMENDED FOR CONTRACTOR USE ONLY:

300 Sq. Ft. One Day Epoxy Flake Floor Kit

This kit is based on installing the CFS-Poly Prime as your prime coat so you get good adhesion to the concrete and broadcasting flake into the wet CFS-Poly Prime. 

*There is no intermediate coat included with this kit. 

The 300 Sq. Ft. One Day Epoxy Flake Floor Kit can cover up to 300 ft.² of floor, depending on the density and porosity of your concrete. If your concrete is soft or porous, square foot coverage may be reduced.

The CFS-Poly Prime is not 100%UV stable and may discolor in direct sunlight so full flake coverage is recommended.

300 Sq. Ft. One Day Epoxy Flake Floor Kit Includes

2-1/2 gallons CFS-Poly Prime. 10 mil thickness @ 166 sq.ft. per gallon coverage. (Vapor Transmission  rated up to 3 pounds per 1000 ft.² )

40 lbs of your choice of 9 Blended flake combinations included, available in  1/4″  only.

2 Gallons CFS-1C Polyaspartic: Single component, high gloss, 100% UV stable, slow set, very easy to install, 30-40 minute working time, high odor. 10 mil thickness @ 166 sq.ft. per gallon

1 pint tabular alumina non-skid additive (aluminum oxide) included with all topcoat options

Flake scraping / recoat time +/- 3 hours

Accelerator can be added to reduce the set time by 1/2.  

Flake scraping / recoat times down to approx  2 hrs when accelerator is used.