2.5 Gallons of Epoxy Included

150 SQ. FT. METALLIC EPOXY FLOOR KIT

(1 customer review)

$570.00$718.00

Share this

Description

INSTALLATION INSTRUCTIONS

POTLIFE WARNING: DO NOT LEAVE MIXED EPOXY IN THE BUCKET, EPOXY WILL SET WITHIN 15 MINUTES IF LEFT IN BUCKET.  POUR ON FLOOR IN STRIPES IMMEDIATELY AFTER MIXING FOR LONGEST WORKING TIME +/- 40 MINUTES.

150 Sq. Ft. Metallic Epoxy Floor Kit includes 2-1/2 gallons of epoxy for up to 150 square feet of floor.

Not recommended for exterior use or direct UV exposure.

CFS-Low Viscosity Primer coverage is approximately 200 square feet per gallon.

CFS-Metallic Epoxy coverage is approximately 90 square feet per gallon.

Optional 2 quarts CFS-High Performance Urethane Top Coat

** IT IS GOOD PRACTICE TO HAVE EITHER DENATURED ALCOHOL OR XYLENE AVAILABLE WHILE INSTALLING THE METALLICS. IF BUBBLES OCCUR FROM VAPOR TRANSMISSION, LIGHTLY MIST EITHER OF THESE SOLVENTS ON TOP WITH A HAND SPRAYER AND THEY WILL POP.

KIT INCLUDES:

3/4 gallon CFS-Low Viscosity Primer (Vapor barrier rated up to 3 pounds per 1000 ft.² of vapor transmission)

1-1/2 gallons CFS-Clear Metallic Epoxy with 8 ounces metallic pigment of your choice (main color)

1 quart CFS-Clear Metallic Epoxy with 4 ounces metallic pigment of your choice (secondary color)

Optional 2 quarts CFS-High Performance Urethane Top Coat

Metallic color pigment packs are included with this kit to provide an array of metallic colors.

40+ metallic color pigments to choose from.

 

FULL SIZE METALLIC PIGMENT COLOR CHART

Colors are digital representations, and may vary from actual colors.

TECHNICAL DATA SHEET:

CFS-CLEAR METALLIC EPOXY

SAFETY DATA SHEET:

CFS-CLEAR METALLIC EPOXY

FREE SHIPPING