Menu
$287.00 – $520.00
| Discount Level | Quantity | Discount % |
|---|---|---|
| 10% Volume Discount | 2 - 3 | 10% |
| 15% Volume Discount | 4 - 5 | 15% |
| 20% Volume Discount | 6 + | 20% |
-
This product is recommended for improving concrete performance during the polishing of concrete.
This product is a two component 100% solids epoxy that can be used as a grout coat for the purpose of improving the performance of concrete in the grind and polish process.
Apply this material to concrete after the +/- 80 grit grind using a flat blade smoother, trowel tight to the floor leaving no excess on the surface.
After it has cured for 3 to 6 hours, the grind and polish process can begin again. Clean up any uncured material with acetone, xylene or other similar solvent.
Coverage of this product is up to 1,500 square feet per gallon, depending on the texture and the porosity of floor.
1/2 Pint accelerator included with 1 1/2 gallon kit.
1 Pint accelerator included with 3 gallon kit.
Only available in clear.
TECHNICAL DATA SHEET:
SAFETY DATA SHEETS:
CFS-EPOXY GROUT COAT ACCELERATOR
FREE SHIPPING
| Size | 1-1/2 GALLON WITH 1/2 PINT ACCELERATOR, 3 GALLON WITH 1 PINT ACCELERATOR |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.