500 SQ. FT. ONE DAY FLAKE FLOOR KIT

$1,088.00$1,549.00

Discount Level Quantity Discount %
10% Volume Discount 2 - 3 10%
15% Volume Discount 4 - 5 15%
20% Volume Discount 6 + 20%

-

Share this

Description

RECOMMENDED FOR CONTRACTOR USE ONLY:

500 Sq. Ft. One Day Epoxy Flake Floor Kit

This kit is based on installing the CFS-Poly Prime as your prime coat so you get good adhesion to the concrete and broadcasting flake into the wet CFS-Poly Prime. 

*There is no intermediate coat included with this kit. 

The 500 Sq. Ft. One Day Epoxy Flake Floor Kit can cover up to 500 ft.² of floor, depending on the density and porosity of your concrete. If your concrete is soft or porous, square foot coverage may be reduced.

The CFS-Poly Prime is not 100%UV stable and may discolor in direct sunlight so full flake coverage is recommended.

500 Sq. Ft. One Day Epoxy Flake Floor Kit Includes

3-3/4 gallons CFS-Poly Prime. 10 mil thickness @ 166 sq.ft. per gallon coverage. (Vapor Transmission  rated up to 3 pounds per 1000 ft.² )

9 Blended flake combinations of your choice, available in  1/4″  only.

Choice of optional topcoats-  (GOOD) 3 Gallons CFS-UV Clear Epoxy Top Coat (not 100% UV Stable, Very low odor), (BETTER) 3 Gallons CFS-High Performance Urethane (100% UV stable, High Odor), (BEST) 4 gallons CFS-1C single component polyaspartic (100% UV stable, High Odor)

3 Gallons CFS-UV Clear Epoxy Top Coat (not 100% UV Stable), easy to install, little to no odor. 10 mil thickness@ 166 sq.ft. per gallon

3 Gallons CFS-High Performance Urethane: Gloss, 100% UV stable, easy to install, high odor. 10 mil thickness @ 166 sq.ft. per gallon* This is a thin viscosity topcoat and will not be as easy to clean as the CFS-UV Clear Epoxy Top Coat or the CFS-1C  Single component polyaspartic.

4 Gallons CFS-1C Polyaspartic: Single component, high gloss, 100% UV stable, slow set, very easy to install, 30-40 minute working time, high odor. 10 mil thickness @ 166 sq.ft. per gallon

1 pint tabular alumina non-skid additive (aluminum oxide) included with all topcoat options

Flake scraping / recoat time +/- 3 hours

Accelerator can be added to reduce the set time by 1/2.  

Flake scraping / recoat times down to approx  2 hrs when accelerator is used.

INSTALLATION INSTRUCTIONS

FULL SIZE DECORATIVE FLAKE BROCHURE

Colors are digital representations, and may vary from actual colors.

 

TECHNICAL DATA SHEETS:

CFS-POLY PRIME

CFS-UV CLEAR EPOXY

CFS-HIGH PERFORMANCE URETHANE

CFS-1C POLYASPARTIC

 

SAFETY DATA SHEETS:

CFS-POLY PRIME

CFS-UV CLEAR EPOXY

CFS-HIGH PERFORMANCE URETHANE CLEAR

CFS-1C POLYASPARTIC

ALUMINUM OXIDE

Additional videos of this system being installed:

 

FREE SHIPPING

Additional information

3 3/4 GALLON CFS-POLY PRIME COLOR

Beige, Gray, Black

FLAKE CHOICE

FB-127 Cabin Fever, FB-310 Orbit, FB-411 Domino, FB-414 Gravel, FB-421 Shoreline, FB-517 Outback, FB-612 Swan, FB-616 Wombat, FB-706 Madras

TOPCOAT WITH 1 PINT ALUMINUM OXIDE

3 Gallons CFS-UV Clear Epoxy (Gloss) Low Odor, 3 Gallons CFS-High Performance Urethane (Gloss) High Odor, 4 Gallons CFS-1C Single Component Polyaspartic (Easy Install) (Gloss) High Odor

ADD EXTRA FLAKE? , 50LBS. INCLUDED

NO EXTRA FLAKE, ADD 10LBS (60LBS TOTAL), ADD 20LBS (70LBS TOTAL)

ADD ACCELERATOR FOR CFS-POLY PRIME

NO THANKS, ADD 1 QUART OF ACCELERATOR FOR CFS-POLY PRIME

Reviews

There are no reviews yet.

Be the first to review “500 SQ. FT. ONE DAY FLAKE FLOOR KIT”